As an Amazon Associate, I earn from qualifying purchases. Read more on disclaimer page.

Pipe Cutter Troubleshooting: Common Issues You May Face!

One of the most efficient methods of hacking off pipes would be a pipe cutter. It is probably the best option when it comes to creating a clean and efficient cut in tubes.

However, there are many issues that you might face when operating this device. These problems range from efficiency issues to safety hazards.

Suppose you’re an experienced plumber or someone who’s learning to be self-sufficient in fixing the various leakage and plumbing issues around the house. In that case, you must know all there is to know about pipe cutter troubleshooting.

And in this article, we’ll help you with that.

Pipe Cutter Troubleshooting Guide

Here are some of the most common troubleshooting issues you may face when using a pipe cutter and how you can solve them.

Safety Hazards

Many people tend to forget how dangerous using a pipe cutter is and how lethal it can be if it is not handled correctly.

These devices have two caution signs labeled into them; one of them warns the user about the possibility of severe injury. The other warns them about the possibility of damages through the rotation of the blades.

The edges of the pipe cutter are sharp enough to cut through metal pipes easily like cake. This ability is also a testament to the strength and power of these devices. It can easily tear into human skin if it accidentally comes in contact with it.

Therefore, it is an absolute necessity to handle these devices with caution as well as wearing protective equipment and taking every possible safety measure.

There are also many indirect risks of using a pipe cutter. These devices produce a lot of noise when in operation. This pollution can cause severe damage to the users’ ear.

The dust created by using these devices is also very unhealthy and prone to explosions and is inflammable.

Only gaining protection from the device itself will not be enough. It’s also vital that we take precautions against the other environmental hazards surrounding it as well.

Here are some steps that you need to follow in order to avoid safety hazards:

  • Have proper eye protection gear when operating a pipe cutter to avoid irritation in eyes from sewage, chemicals, or dust.
  • Wear equipment that would safeguard your ears from noise pollution and prevent hearing loss.
  • Use gloves to gain protection from cuts. In case of hands getting injured, it must be covered to prevent exposure to sewage and chemicals.
  • Equip yourself with a respirator to be safe from inhaling residual dust or toxic fumes. Inhalation would lead to asthma, dermatitis, and even eye infection.

Compatibility Issues

One of the most common mistakes plumbers make is not understanding which pipe cutters suit the pipes they are operating. Pipe cutters have various sizes that are made to match that of the pipe sizes.

These can function smoothly based on how compatible they are with the pipes. If the pipe cutter's size is not similar to that of the tube, then the device can't give out the best output.

Compatibility is also a problem when assembling the pipe cutter itself. Pipe cutters are assembled through purchasing various components separately.

To understand if the device is going to get the job done, it’s better to have the pipe cutter prepared before operating. The sizes of the components must match each other to avoid any dangers when using it.

When it comes to the device assembly, always refer to the user manual. The compatibility of the pipe cutter depends a lot on the model. Therefore, the procedure is not similar for all devices. Consequently, it’s best to follow the manual to attain perfect assembly.

Maintenance Problems

The efficiency of a pipe cutter depends a lot on how well the tool is being maintained. In many cases, users tend to be careless with one or more components that cause the product to malfunction or underperform. This carelessness also results in having to replace the parts ahead of the required time.

Avoiding such a situation is quite easy. Simply ensure that all the parts of the pipe cutter receive cleaning and care on a regular basis. The blade needs to be sharpened routinely to prevent it from losing its edge. This will also protect the motor from receiving damages.

Moreover, the parts also need to be oiled in intervals to avoid them from rusting. The device has to be cleaned after every use in order to make sure that the excess from the cutting doesn’t internally damage the product.

Conclusion

Pipe cutter troubleshooting might seem like a complicated task, but the solutions are pretty simple and easy to follow.

If you can keep these issues in check and routinely follow these steps, then operating pipe cutters won’t be a problem at all. We hope using this device doesn’t feel like a daunting task for you from now on.

Click Here to Leave a Comment Below 0 comments