Workbench Dimensions: How to Determine the Exact Size

A good and solid workbench is essential for every woodworker. However, a table, regardless of how strong, can sometimes still not be good enough.

That is because you need a table that matches your requirements and is exact in size for your projects. If you are wondering how to determine the exact size of your workbench, then you’re in the right place. We will tell you all you need to know to figure out the dimensions of the workbench of your dreams.

Why Is It Important to Determine Workbench Dimensions?

The tools and projects you work on will essentially influence your workbench. Someone who works with a lot of machines will need a workbench that is significantly different from a woodcarver who works on delicate woodwork.

Therefore, you need a workbench with sufficient workspace and the perfect height for working long hours. Hence, you need to keep three things in mind while determining the dimensions of your workbench.

Height of the Workbench

This is the most important factor because other niggling factors can be worked around, but a workbench that is short will result in a bad back. And if it is too high, you will have difficulty reaching your tools and put stress on your upper body.

If your work involves a lot of hand tools, you should have a low workbench. Such low benches will allow you to work on top of the piece, carve with a chisel, or to plane it properly. Furthermore, for intricate carving work, you can sit on a tool or have an additional bench to place on your workbench to increase its height.

However, a low bench is not for you if you have to use plenty of machines. You will need a higher workbench, which will ease your work of sanding, ability to observe all the details on the piece, or using a router.

In order to figure out the dimensions, simply stand straight and let your arms stay by your side. Have your palms facing forward and parallel to the floor. You can mark the place where the crease inside your wrist meets the wall and add two or three inches as necessary.

Or simply use your existing bench and add your desired height with it. Also, keep in mind that even if the workbench looks low to you while standing upright, it will become comfortable as your stance changes during work.

And when you want to put more pressure on the project, your body will lower itself, and so the height of the workbench will seem appropriate. So you can opt for a workbench of the following length:

  • 29-30 inch: This is a workbench on the lower side (74-76cm), which is perfect for hand carving as it allows you to put your body weight on the project.
  • 34-36 inch: This is the average size (86- 91cm), which is preferred by many as it fits a wide range of work.
  • 38-39 inch: This is a taller bench (97-99cm), which is suited for using power tools, cutting, and woodwork with details.

Depth of the Workbench

Personalization is the key to attaining the perfect workbench. The second most important thing you need to consider is the depth of the workbench. A good way to determine the depth of a workbench is to measure it according to the length of your arm so that you can easily reach your tools.

Usually, the depth is 24 inches. You will notice that the majority of work can be done in the 12 inches at the front of the workbench.

For example, if you are planning on planing wood, it can be comfortably completed in that 12-inch at the front of the workbench. Furthermore, if it is more than 24 inches, it will become difficult for you to reach across the workbench to reach for your radial arm saw.

And you will need to put stress on the top of your body to reach tools. This is not good for your health. If you are very tall or if you generally work on very large pieces of wood, then you can add a few extra inches.

Also, if you want to use your workbench for the purpose of assembly, you can opt for a depth that is more than 24 inches.

However, if your workstation does not have a place to fit such a large workbench or you want a temporary fix, just keep a large piece of plywood around. Then you can use the extra space for the purpose of assembly, and after use, you get the advantage of a more compact workspace.

Length of the Workbench

The third factor you need to consider is the length of the workbench. Now, the length of a workbench, unlike width and height, does not depend on your body length.

Rather it depends upon the space you have in your garage or workplace. You can make it as long as you want because you can work on large pieces of work, keep your tools, or other woodwork on the workbench.

However, you need to keep in mind that the longer you want the workbench to be, you have to use thicker wood in order to ensure the stability and durability of your workbench.

Final Words

The perfect workbench is not an impossible feat; it can easily be attained by you. No longer do you have to suffer from back pain or other types of physical stress while working long hours. As personalization is the secret to getting a perfect table, you can make one that is tailored to your body length.

And the height, depth, and length of the workbench heavily influence productivity. So while a workbench has to be durable, functional, and beautiful, it must also be made by paying great attention to minute details.

So, it is very important that you take accurate measurements in order to design and make your dream workbench.

Click Here to Leave a Comment Below 0 comments